Home › Products › C.A.S.E.
CASE coatings cables

C.A.S.E.

Specialty additives for coatings, adhesives, sealants and elastomers.

covers crosslinking agents, UV stabilizers, flame retardants and processing additives for the C.A.S.E. segment. Our FR portfolio spans brominated, phosphorus-based and inorganic systems across all major polymer platforms.

Brominated FR — DBDPE · TBBPA · HP3010
Phosphorus FR — non-halogen systems
HALS & UV absorbers
Crosslinkers for PU & epoxy
Wire cable rubber insulation CASE
✓Crosslinking & cure systems for elastomeric C.A.S.E.
✓Halogen-free and halogenated FR solutions
✓Antioxidants & light stabilisers for coatings
✓ATH, MH and inorganic FR for cable & construction
Wire cable rubber compounds
Rubber extruded hose sealing Copper wire cable insulation
VANFLEX®
C.A.S.E.
Full catalog below

Full Product Catalog — C.A.S.E.

All products available under VANFLEX® brand. SDS, TDS and CoA on request.

Request SDS / TDS Request a Sample →
02🖌️
C.A.S.E.
ProductChemical Class (CAS)Description & Application
DCP · BIPB · DHBP · DTAP · BPOOrganic Peroxide (various)Organic peroxides for crosslinking EPDM roofing membranes, PP vis-breaking, hot-melt adhesive and elastomeric sealant production. Selection based on processing temperature, odor requirements and byproduct profile.
ZBEC · ZDBC · ZDEC · TMTD · TBzTDDTC / Thiuram AcceleratorAccelerators for water-based latex adhesive crosslinking and elastomeric sealant cure. TBzTD chosen where nitrosamine-free processing is required.
MBT · MBTS · ETUThiazole / Thiourea AcceleratorPrimary accelerators for CR and ECO elastomeric sealants and coatings. ETU provides fast cure in CR construction sealants, roof coatings and cable sheathing.
TAIC · TAC · HVA-2 · ZDA · ZnOCo-agent / ActivatorCo-crosslinking agents boosting cohesive strength. HVA-2 essential in FKM-based high-temperature sealants. ZDA provides ionic crosslinking in specialty elastomeric coatings.
Request TDS →
ProductChemical Class (CAS)Description & Application
AO-1010Hindered Phenol Primary AO (6683-19-8)Primary AO for PU, SBR, EVA and PE-based adhesives and coatings. Prevents oxidative degradation during hot processing and service life. FDA-compliant grades for food packaging adhesives.
AO-1024Hindered Phenol + Metal Deactivator (32687-78-8)Dual AO + Cu deactivator. Critical in wire & cable compounds and hot-melt adhesives in metal contact.
AO-1076Hindered Phenol Primary AO (2082-79-3)Low-volatility hindered phenol. FDA compliant for food packaging adhesives and sealants. Low color, minimal appearance impact.
AO-1330Trifunctional Hindered Phenol (1709-70-2)Excellent dielectric properties for PE/PP cable insulation. Very low volatility — effective in high-temperature cable extrusion.
B215 · B225 · DSTDP · DLTDPPhosphite / Thioester Secondary AOSecondary AOs providing process stability and long-term protection in combination with phenolic primaries for coatings and adhesives.
MB · MMB · ZMMB · NDBCBenzimidazole / Nickel DTC (non-staining)Non-staining AO for light-colored coatings, clear sealants and transparent latex adhesives. NDBC adds copper deactivation for metal substrate applications.
HALS 22/28/55/77/92HALS (hindered amine, various)Long-term UV stabilization for outdoor coatings, architectural sealants and PU topcoats. Cyclic radical scavenging mechanism — exceptional durability in UV-exposed applications.
UV Absorber 1022/1031/1050UV Absorber — benzophenone/BZTCandles, waxes, PVC plastisols, SBR and EVA coatings. Convert UV (290–380nm) to heat. Enhance color stability and surface protection.
UV Absorber 3280/3290UV Absorber — benzotriazole (290–400nm)High-performance broad-spectrum UV absorber. Automotive clearcoats and industrial topcoats requiring long-term UV protection.
Request TDS →
ProductTypeDescription & Application
Hard & Soft Kaolin ClayMineral Filler (aluminosilicate)Reinforcing and extending filler for adhesives and elastomeric coatings. Hard: reinforcement; Soft: opacifier and rheology modifier. Improves barrier properties and cost-efficiency of sealant formulations.
PyrophylliteMineral Filler (phyllosilicate)Inert platy mineral for caulking compounds, crack fillers and architectural coatings. Chemical resistance and dimensional stability. Low oil absorption maintains sealant flexibility at high loading.
Wollastonite (VANSIL WG)Mineral Filler (calcium silicate)Needle-shaped filler reinforcing adhesives, sealants and phenolic compounds. Improves flexural strength, reduces shrinkage and enhances abrasion resistance.
SP-1044/1045/1055/1068Alkylphenol Formaldehyde ResinHeat-reactive phenolic tackifier for PSA and hot-melt adhesives. Improve tack, peel strength and high-temperature adhesion. SP-1055/1068 as methylene donors in resorcinol bonding systems.
Propylene-Based ElastomerPropylene-ethylene copolymer elastomerHot-melt adhesive base polymer modification. Improves flexibility, low-temperature performance and adhesion of hot-melt formulations. Hygiene, packaging and label adhesives.
Request TDS →
ProductChemical Class (CAS)Description & Application
DBDPO (DecaBDE)Decabromodiphenyl Oxide (1163-19-5)Most widely used brominated FR. High Br content (83.3%) at relatively low loading. HIPS, ABS, polyolefins, nylon and textile back-coating. Requires Sb₂O₃ synergist for optimal performance.
TBPATetrabromophthalic Anhydride (632-79-1)Bifunctional reactive and additive FR. Copolymerizes into polyester or reacts with polyols in PU — permanent, non-migrating flame retardancy. Also additive FR in epoxy and PU systems.
HP3010 / HP7010Brominated Polystyrene (88497-56-7)Polymeric brominated FR with excellent compatibility in styrenic polymers. Non-migrating due to polymeric structure. HP7010 higher MW for superior thermal stability in engineering resins.
EBPEthylene Bis(pentabromodiphenyl) (84852-53-9)High MW — low migration. HIPS, ABS and textile where surface bloom of lower MW FR is a problem. Good thermal stability for high-temperature engineering resin processing.
DBDPEDecabromodiphenylethane (84852-53-9)Drop-in DBDPO replacement with improved thermal stability. Better UV resistance than DBDPO. HIPS, ABS, PE and PP — increasingly preferred as DBDPO restrictions tighten.
HBCDHexabromocyclododecane (25637-99-4)Alicyclic additive FR specifically for EPS and XPS rigid foam insulation. Low melt viscosity impact — critical for foam processing. Textile back-coating for upholstered furniture.
TBBPATetrabromobisphenol A (79-94-7)Most widely used reactive brominated FR. Copolymerized into epoxy for PCB laminates (FR-4) — permanent, non-blooming. Also additive FR in ABS and epoxy coating systems.
Request TDS →
ProductChemical Class (CAS)Description & Application
TCPPTris(2-chloro-1-methylethyl) phosphate (13674-84-5)Halogenated phosphate FR for flexible PU foam, rigid foam and rubber. Cost-effective flame retardancy. Used in furniture, automotive seating and building insulation foam. SVHC candidate — monitor regulatory status for EU export.
TDCPTris[2-chloro-1-(chloromethyl)ethyl] phosphate (13674-87-8)Higher chlorine content than TCPP — enhanced FR performance in flexible PU foam. Used in upholstered furniture and automotive interiors. SVHC-listed — supply subject to customer regulatory compliance.
BDPBisphenol A Diphenyl Phosphate (5945-33-5)Oligomeric phosphate ester FR and plasticizer. PC/ABS and engineering resins — non-halogen UL94-V0 compliance. Low volatility, permanent effect. Also improves impact resistance and melt flow of PC/ABS blends.
TCPTricresyl Phosphate (1330-78-5)FR and plasticizer for PVC, NBR and rubber. Also hydraulic fluid base and fire-resistant lubricant additive. FR functionality combined with plasticizing in flexible PVC wire insulation.
TEPTriethyl Phosphate (78-40-4)Reactive phosphate FR for PU foam. Can be incorporated into polyol chain. Halogen-free. Rigid and flexible PU foam for building insulation and furniture meeting fire safety standards.
APPAmmonium Polyphosphate (68333-79-9)Intumescent FR component for PP, PE and intumescent coatings. Forms expanded carbonaceous char barrier when exposed to fire. Halogen-free. Used with synergists for intumescent cable coatings and building products.
DOPO9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (35948-25-5)Reactive phosphorus FR for epoxy systems and PCB laminates. Covalently bonds into polymer backbone — non-migrating, permanent. Halogen-free alternative in electronics and aerospace epoxy.
RDPResorcinol Diphenyl Phosphate (57583-54-7)Oligomeric phosphate FR for PC/ABS blends. Very low volatility vs. monomeric phosphates. UL94-V0 in PC/ABS at low loading. Non-blooming and thermally stable in high-temperature processing.
Request TDS →
ProductChemical Class (CAS)Description & Application
Zinc Borate ZB-467Zinc Borate (1332-07-6)Multifunctional inorganic FR synergist. Enhances halogenated systems, suppresses smoke and reduces afterglow. Wire & cable, rubber and intumescent coatings. Ceramification at high temperatures (Firebrake® ZB).
ATHAluminium Trihydrate (21645-51-2)Most widely used inorganic FR. Endothermic decomposition releases water vapor cooling the flame while depositing Al₂O₃ char barrier. Halogen-free, smoke suppressing. EVA cable, rubber and coatings at 40–65% loading.
Sb₂O₃ (ATO)Antimony Trioxide (1309-64-4)Essential synergist for halogenated FR systems. Forms antimony oxyhalides interrupting flame chain reaction. Standard 3:1 Br/ATO ratio. Wire & cable, textiles and engineering plastics.
MHMagnesium Hydroxide (1309-42-8)Halogen-free. Decomposes endothermically at higher temperature than ATH (330°C vs 220°C) — suitable for engineering plastics with higher processing temperatures. Cable jacketing and roofing membranes.
Chlorinated ParaffinChlorinated Paraffin (various chain lengths)Halogenated FR and plasticizer for PVC compounds. Cost-effective at high loading. Medium and long-chain grades available for regulated applications.
Request TDS →